Water is the single most important substance for life on our planet.

All living beings are made up of large amounts of water.

We humans consist of over 70% water. It is therefore vital to improve water quality and have healthy 'living' water to sustain us.


In the industrialised world of today, aqua vivens (='living', energetically charged water) is a rarity. In our drinking water supply systems, water is exposed to the detrimental energetic effects of straight unnatural water pipes, high mains pressures and chemical treatments. Water is not allowed to move in its naturally winding way thereby causing loss of life force.

We believe that water has a "memory" which is attributed to the dipolar structure of the water. Hundreds of water molecules group together and form clusters, in which colloidal minerals and biophotons (light energy) interact. These clusters are very sensitive structures and are impressionable by vibrational influences. In this way water acts as a receiver and transmitter of information. Homeopathy is based on this principle.

The natural world, which we are a part of, moves in a spiralling fashion. This is particularly obvious in shellfish, snails, antelope horns, pine cones and climbing plants such as clematis and ivy. In a more subtle way, all plants grow in a spiralling fashion always turning to face the sun. The DNA of all organisms forms a double helix spiral. Water flowing in a natural meandering river system forms whirls and eddies and never follows a straight path, and like all free falling objects, rain drops, too, fall in a subtly spiralling motion.

We believe that this spiralling motion is fundamental to life and is important in ways which have not yet been understood by mainstream science.


The Original Vortex Water Energiser ™


The Vortex Energiser (20cm height, 18cm greatest width) is a spiralling copper device. It contains water which has been prepared in our implosion machine. Implosion is one of the fundamental processes behind nature. The Austrian Viktor Schauberger, the father of implosion technology saw implosion as the life generating principle and explosion as the life degenerating principle (Coats, 1996).

The Vortex Energiser is used to improve the energetic quality of water. Direct contact with water is not necessary as the energy is transferred by way of vibration. This process is similar to one tuning fork picking up the vibration of another tuning fork, even if the first one has not been struck. This is also called resonance. No electrical power supply is required.


Please see our scientific research section for darkfield microscopic images which show the difference in tap water as a result of the Vortex Energiser.

Independent tests carried out by the Biofield Laboratory in Vienna have shown that the physical properties pH and conductivity of water change in a subtle way with energisation. In some tests the pH of acidic bidistilled water was raised towards the 'normal' region of pure water. These changes appear to be a direct result of the clustering of the molecules with energisation.

An aspect that requires further investigation is the transformation of dissolved minerals into highly charged colloidal particles. There are indications that this transformation is taking place, which might explain why many people experience a reduction in the taste of chlorine and hardness after fitting a Vortex Energiser to their domestic water system.

So what are the effects on tap water when a Vortex Energiser is fitted to it?

The obvious physical changes to tap water as reported by most of our customers since 1998 are:

· the clarity of the water improves, some people can actually see a purply blue hue around the water, which is part of the emanations coming from the water.water regains a remarkable natural quality and taste. It becomes more palatable and less hard.the taste and smell of chlorine is much reduced or even eliminated. Lime scale deposits become soft and are eventually removed. Bathing in energised water is a reviving experience leaving skin supple and soft. fresh food and cut flowers last longer.

· water virtually doesn't become stagnant and foul smelling.


The Vortex Energiser when attached to the domestic water inlet pipe, energises all the water in the house - instantly and constantly. There are no further maintenance requirements.



Application & Installation Of The Original Vortex Water Energiser™

Attachment to heating and cooling systems


Before you fix the Vortex Energiser permanently to the water mains pipe, we recommend you first use it on all closed heating and cooling systems, such as the central heating, the fridge and the freezer. Because these are closed systems, permanent fixture of the Vortex Energiser is not necessary. 24 hours is usually sufficient to transfer the energy permanently.

To energise the domestic central heating system lay the Vortex Energiser on the floor with the apex pointing at and touching a pipe coming down from one of the radiators. Leave the Vortex Energiser in this position for 24 hours, preferably with the heating on. This will ensure that the energy is taken on by the whole system.

You may now like to do the same with your fridge and freezer to ensure that new food coming into the fridge will be energised. You may also leave the Vortex Energiser touching one of the cooling pipes coming from the compressor for 24 hours.

Please do not put the Vortex Energiser in the freezer. Freezing the Vortex Energiser may cause the rivets, which seal the tube ends, to pop out. Just place the Vortex Energiser on or next to the freezer for 24 hours.

You may carry out the same procedure with your car's cooling system or even submerge the Vortex Energiser in your garden pond or swimming pool.

Attachment to main water supply pipe


After you have dealt with the closed heating and cooling systems we recommend that you attach the Vortex Energiser permanently to your drinking water system. You need the Vortex Energiser here at all times to ensure that new incoming water becomes energised. For maximum efficiency the Vortex Energiser needs to be fixed to the main pipe in such a way that its apex is in direct contact with the pipe. A convenient and simple way is shown in the drawing. The two straps provided are used to tie the apex and the top winding of the Vortex Energiser to the pipe. This method of attachment works equally well for vertical and horizontal pipes. If this method of attachment doesn't work in your situation, having the apex of the Vortex Energiser touching the pipe as in the drawing on the previous page will work equally well.

In some types of accommodation, there may be more than one mains water supply pipe and pipes may be less accessible. In this case the Vortex Energiser can be placed in a position near the taps. In a bathroom for instance, water flowing into the sink, bath tub or shower takes on the energy from one centrally suspended Vortex Energiser. However, if energised water is required in the kitchen as well as bathroom, another Vortex Energiser will have to be installed.

The applications of the Vortex Energiser seem to be endless. So many uses can be found in the house, garden, office and in industrial applications. We invite you to experiment with the Vortex Energiser for yourselves. Please also read our customers’ testimonials.